How To Guide for PCKT Products

How does it work?

PCKT One Plus
PCKT One
SPRK Cartridge
SNAP Tool

1. Whats in the box?

2. Power & Charging

Power On/Off
5 Clicks - Turns the device on and off. It will be indicated by 3 blinks.

Manual Fire
Press and Hold - The device will fire for 15 seconds and then turn off there is a 1 second delay when you first press the button. There will be three lights red, blue and green that will flash alternately

Power Modes
2 Clicks -Will change the power modes between Low, Medium and High. Keep in mind the device will start in Low power mode.

Battery Life
1 Click - When pressing the button once it will indicate the battery life. Green indicates full battery, Yellow indicates half charged and Red indicated battery is very low.

Charging
The device can be charged by connecting it with a wall adapter or computer via the USB cable provided. The charging indicator LED is red during charging and will turn green when the device is fully charged.

Malfunction
Red led blinking could be caused by several things, most likely with your cartridge not being installed correctly. Make sure your cartridge is secured tightly to the magnetic adapter. If the problem persists, please contact support.

Power On/Off
5 Clicks - Turns the device on and off. It will be indicated by 3 blinks.

Power Modes
2 Clicks -Will change the power modes between Low, Medium and High. Keep in mind the device will start in Low power mode.

Battery Life
1 Click - When pressing the button once it will indicate the battery life. Green indicates full battery, Yellow indicates half charged and Red indicated battery is very low.

3. Attach your 510 cartridge to a magnetic adapter & Insert cartridge w/magnetic adapter into your device

This device comes with 2 different magnetic adapters for use with varying cartridge sizes. Adapters are meant to last the life of the device and should NOT be thrown away when cartridges are finished.

1. Whats in the box?

2. Power & Charging

Power On/Off
5 Clicks - Turns the device on and off. It will be indicated by 3 blinks.

Manual Fire
Press and Hold - The device will fire for 5 seconds and then turn off. There is a 1 second delay when you first press the button. There will be two lights, red and green that will flash alternately.

Power Modes
2 Clicks -Will change the power modes between Low and High. Keep in mind the device will start in Low power mode. The device is in Low power mode when LED indicator flashes white 3 times, and High power mode when LED indicator flashes white 4 times.

Power On/Off
5 Clicks - Turns the device on and off. It will be indicated by 3 blinks.

3. Attach your 510 cartridge to a magnetic adapter & Insert cartridge w/magnetic adapter into your device

This device comes with 3 different magnetic adapters for use with varying cartridge sizes. Adapters are meant to last the life of the device and should NOT be thrown away when cartridges are finished.

1. How to fill your cartridge

To fill your SPRK cartridge, unscrew the top of the cartridge mouthpiece to expose the chamber opening. Take a bottle of your favorite concentrate liquid and carefully fill the chamber opening making sure not to overfill the chamber.

Screw the top mouthpiece back on to the SPRK cartridge. Wipe any residue from the cartridge before inserting the SPRK into your PCKT device.

Wait 2-3 minutes for oils to soak into the cartridge before firing your device.

1. Attach 510 cartridge to magnetic adapter

If you are using a cartridge other than the SPRK cartridge, you will need to attach a magnetic adapter before you can insert your cartridge into the SNAP Tool. To attach a magnetic adapter to your 510 cartridge screw on the the adapter to the bottom end of your 510 cartridge.